China Gost Butterfly Valve Suppliers, Manufacturers, Factory

Product Details

Gost Butterfly Valve

STANDARD MATERIAL LIST
No.	Parts Name	Material
1	Bottom Cover	A182 F6, F304, F304L, F316, F316L
2	Stud	A193 B7, B7M, B8, B8M
3	Gasket	Graphite
4	Body	A216 WCB, A352 LCB, A351 CF8, CF8M, CF3, CF3M, Duplex
5	Stem	A182 F6, F304, F304L, F316, F316L
6	Board	A182 F6, F304, F304L, F316, F316L
7	Disc	A216 WCB, A352 LCB, A351 CF8, CF8M, CF3, CF3M, Duplex
8	Pin	A182 F6, F304, F304L, F316, F316L
9	Stud	A193 B7, B7M, B8, B8M
10	Seal Ring	SS304+Graphite
11	Bushing	SS304+PTFE
12	Packing	Graphite
13	Yoke Nut	A194 2H, 2HM, 8, 8M
14	Yoke Stud	A193 B7, B7M, B8, B8M
15	Yoke	A216 WCB, A352 LCB, A351 CF8, CF8M, CF3, CF3M, Duplex

Feature
1. Compact structure: low volume, light weight and easy maintenance
2. Smooth flow channel: low flow resistance, low pressure drop and high flow
3. Three-eccentric multi-level compound seal butterfly valve: It uses the unique cam effect, so that during the valve's 90 ˇtravel the seat is totally disengaged from the disc seal ring without any friction.
   Three-eccentric soft seal butterfly valve: The sealing pair is made of integral PTFE materials, which are suitable for applications with high medium cleanliness, frequent valve on-off and high requirements for sealing pair corrosion resistance. Especially it can ensure that its service life is basically the same as that of the pipe in the thermal system.
   Three-eccentric metal seal butterfly valve: The sealing pair adopts a full metal seal structure. The sealing pair adopts a "hard-contact-hard" structure as shown in figure 1 pneumatic three-eccentric butterfly valve. The seal has a long service life. It is suitable for service conditions where the medium working temperature is extreme, the erosion is severe and there is the occurrence of "crystallization".
4. Strong anti-wear performance: The disc adopts a three-eccentric structure and the sealing face is subject to hard alloy overlaying welding with good anti-wear performance.
5. Valve flow characteristics: Approximate equal percentage. Control and shut-off can be realized.

The main technical parameters
Body
Type: Straight-through flat offset casting body
Nominal diameter: DN50 ~ 1600 (NPS2 ~ 64)
Nominal pressure: PN 16 ~ 40 (Clsaa150 ~ 600)
Connection type: flange type, wafer type
Body material: A216-WCB, A351-CF8, A351-CF8M, A351-CF3,
                       A351-CF3M, A217-WC6, A217-WC9
Bonnet: Standard: -29 ~ 250 ˇ
             High temperature (cooling fin) Type: 250 ~ 600 ˇ
             low temperature (extension) type: -46~-29ˇ
See table 1 for working temperature and pressure ranges of various
materials.
Packing: PTFE, flexible graphite, nickel-based wire reinforced flexible
Graphite