PN10/PN16/PN25 ,ANSI150, BS10 TABLE D/E,JIS 10K,16K
With-Pin,One Stem no-Pin,Double Stem no-pin
SS304, SS316, Ductile Iron, WCB, Aluminium Alloy
EPDM, PTFE, VITON, FPM
SS304, SS316, Hastelloy, Aluminium Bronze
Spherical iron covered ceramics
Ductile Iron covered with Nylon , Ductile Iron covered with Nickel, Ductile iron vulcanized rubber
1.Valve Design: API 609, MSS SP-67
2.Face To Face: API 609, MSS SP-67, DIN3202, BS EN558-1
3.Pressure Test: API 598
4.Flange Drilling: ANSI B16.1 class150, BS4504 PN10/PN16, DIN2501 PN10/PN16
5.Top Flange: ISO5211
1.vertical center line disc
2.Anti-Blow Out Stem
4.Fire safe Design
5.Low Friction Body Seat
1.5 times the working pressure with water. This test is performed after
valve assembly and with disc in half position open, it is called as a
body hydro test.
Seat Test: 1.1 times the working pressure with water.
At the time of final inspection, each valve and its actuator
(Flow-Control Lever / Gear / Pneumatic Actuator), under goes a complete
operating test (Open/Close). This test carried out without pressure and
at ambient temperature. It ensures the correct operation of the valve /
actuator assembly with accessories such as solenoid valve, limit
switches, air filter regulator etc.
Special Test: On request, any other test can be carried out according to special instruction by client.
1.Water Treatment Plant 2.Breweries
3.Drilling Rigs 4. Heating & Air Conditioning
5.Paper Industry 6.Chemical Industry
7.Gas Plant 8.Pneumatic Conveyors
9.Sugar Industry 10.Waste Effluent Treatment Plant
11.Cooling Water Circulation 12.Compressed Air