HI-PVC Gate Valve
Type size 8”-14”
PARTS | |||
NO. | DESCRIPTION | PCS. | MATERIAL |
1 | Body | 1 | HI-PVC |
2 | Gate (Plug) | 1 | PP |
3 | Stem | 1 | HI-PVC |
4 | Bonnet (A) | 1 | HI-PVC |
4a | Bush (A) | 1 | PP |
4b | Knock Pin (A) | 1 | PP |
5 | Bonnet (B)* | 1 | HI-PVC |
5a | Bush (B) | 1 | PP |
5b | Knock Pin (B) | 1 | PP |
6 | Thrust Bearing | 1 Set | PP |
7 | Bolt, Nut, Washer | - | Stainless Steel 304 |
8 | Hand Wheel | 1 | PP |
9 | Indicating Cover | 1 | PC |
10 | Indicating Ring | 1 | PVC |
11 | Guide Pin | 1 | Stainless Steel 304 |
12 | Guide Pin Holder | 1 | PVC |
13 | Gasket | 1 | EPDM |
14 | O-Ring (A) | 1 | EPDM |
15 | Washer | 1 | PVC |
16 | Nut | 1 | Stainless Steel 304 |
17 | Screw | 1 | Stainless Steel 304 |
18 | O-Ring (B) | 1 | EPDM, FKM |
19 | O-Ring (C) | 3 | EPDM, FKM |
20 | O-Ring (D) | 1 | EPDM, FKM |
21 | O-Ring (E) | 1 | EPDM, FKM |
22 | O-Ring (F) | 1 | EPDM, FKM |
23 | Sheet Gasket | 1 | EPDM, FKM |
24 | Plug | 1 | PVC |
Sample Specification
All gate valves shall be constructed of high impact PVC and have no metal to media contact. The gate shall be a tapered cylindrical plug design PVC shall conform to ASTM D1784 Cell Classification 12454-A, and PP to ASTM D4101 Cell Classification
PP0210B67272. Valves shall have a pressure rating of 150psi at 70º F sizes 1-1/2" through 8", 110psi at 70º F size 10", and 75psi at 70º F sizes 12" and 14". The valve shall have a non-rising stem, come standard with sealed position indicator, clean-out plug and EPDM or FKM seals, as manufactured by Asahi/America, Inc.