The Check Valve
The route that the gas takes from the tanks to the aboveground dispenser isn't terribly complicated, though it may take a few minor twists and turns. When pumping is complete and the pump motor is turned off, the gas inside the pipe doesn't simply fall back into the tank. Instead, it's held inside the pipe by a check valve. The check valve, which is located above the gas inside the pipe, creates an airtight seal above the fluid. Although the bottom of the pipe remains open, the vacuum pressure created by the check valve holds the gas in place. This is a process known as keeping the prime.
Using a check valve to hold the gas inside the pipe prevents unnecessary wear and tear on the suction pump and assures that a supply of gas will remain in the pipe so that the next customer won't have to wait for it to be drawn all the way up from the tank. It may not seem like a big deal, but the process can take 10 to 15 seconds. That isn't a very long wait by any means, but it can be an eternity when you're waiting for gas to be pumped.